This Pneuforce reducing elbow connects 6mm tubing to 4mm tubing while changing the direction of the pneumatic or vacuum line by 90 degrees. It provides a compact push-to-connect solution where both tube-size reduction and a directional change are required.
The lightweight engineering polymer body provides excellent dimensional stability, wear resistance and corrosion resistance for industrial pneumatic installations.
| Specification | Details |
|---|---|
| Product Type | Reducing elbow push-to-connect fitting |
| Part Number | PLGJ06-04 |
| Larger Tube Connection | 6mm tube |
| Reduced Tube Connection | 4mm tube |
| Configuration | 90-degree reducing elbow |
| Fitting Body | Acetal engineering polymer |
| Release Collar | Acetal engineering polymer |
| Gripping Claw | Stainless steel |
| O-Ring Seals | NBR (Nitrile Rubber) |
| Service | Industrial compressed air and vacuum |
| HTS Code | 7412.20.0035 |
Unlike a standard union elbow, this reducing elbow connects two different outside-diameter tube sizes. It is useful when a larger main line must transition to a smaller branch or component connection without adding a separate reducer and elbow.
Installation Note: Confirm the outside diameter of both tube connections before ordering. Cut tubing squarely and push each tube fully into the correct side of the fitting. To remove tubing, depress the grip collar; the Click-Click sound and feel indicate collar disengagement during tube release.
A reducing elbow connects two different tube sizes while turning the line through 90 degrees. This model connects 6mm tubing to 4mm tubing.
A standard union elbow normally connects equal tube sizes. A reducing elbow has two different tube connections, allowing the line to reduce in size as it changes direction.
Yes. It is suitable for industrial compressed air and vacuum applications when used with compatible tubing and within the rated conditions of the system.
The Click-Click feature provides audible and tactile feedback when the grip collar is depressed during tube release. It relates to disengagement of the gripping mechanism, not tube insertion.
No. This P-Series fitting is intended for industrial pneumatic and vacuum service and is not approved for potable water. For potable water applications, use the Pneuforce S-Series stainless steel push-to-connect range.
