Metal Work Pneumatics SYNTESI FRLs

Metal Work Pneumatics SYNTESI FRLs

The various elements of Syntesi® A can be connected to the air feed and delivery circuit using pneumatic nickel brass or passivated aluminium ports B and can be fixed together using nipples C. The nipples and ports are easy to remove by unscrewing the two front screws D. This solution has numerous advantages:

• Reduced overall dimensions
• Free composition of multiple elements, without the need for brackets, stay bolts or yoke
• The threads for the fittings are metallic, allowing high tightening torques, also for tapered threads
• Maximum flexibility: a unit can be transformed at any time by adding an element or replacing a port with another one, e.g. 1/4” instead of 1/8”
• - The air intake port can be the same or different from the outlet port, as desired
• Standard Syntesi® ports are: 1/8”, 1/4”, 3/8” for size 1; 3/8”, 1/2”, 3/4”, 1” for size 2.

The nipples have different functions:

• Nipple C joins two elements of the same size together
• Size adaptor E can be used to connect an element in the Syntesi® 2 series with one in the Syntesi® 1 series
• The 90° adaptor F can be used to connect two 90° angled elements. For example, it can help directing the regulator knob or the control knob of a sectioning valve towards the user
• The two-way air intake G is a simple and cost-effective system which, besides connecting two elements together, has 2 opposing threaded air intakes
• The adaptor for Regtronic H can be used to fix the Regtronic 1/4” proportional valve to a Syntesi® size 1 element

Additional PortsOn the front and back of ALL Syntesi® elements there is a port (1/8” for size 1, 1/4” for size 2) that can be used for pressure gauges L, pressure switches M or, given the high flow rate, as additional air take-off N. These ports are downstream of the element, so, for example, a regulator port can supply air at a set pressure or a filter port can supply filtered air (not valid for activated carbon filter and depurator).
Wall FixingOnly two through screws O are needed. No bulky brackets or additional flanges are required. The bracket P can be used to separate the unit from the fixing wall, e.g. to mount a fitting to the rear port.
Fixing on a DIN EN50022 bar. Can be done using the bracket kit U.
Regulator fixing bracket Q.Regulators and filter-regulators can also be fixed using a steel bracket Q that embraces the bell.
Padlockable knob R.The knobs of regulators, filter-regulator and sectioning valves can all be padlocked. The steel plate is included in the supply. You can insert up to two 3 mm diameter padlocks T on size 1 and three padlocks on size 2. As an alternative, the sectioning valve can have a steel plate suitable for a single 6 mm diameter padlock.
Safety valve S. The unit can incorporate a series 70 SAFE AIR® safety valve.